CEBLV unit can be supplied from a 230V AC or a 216V DC power source. As a result, the unit can be connected to a central battery system as a substation without installing internal batteries. This functionality enables the system to be used in facilities where a central battery system is required, but a safe voltage
must also be ensured in areas where there is a risk of electric shock.
*National regulations apply
Decentralized system:
■ Main station failure.
■ Cable failure: main station – substation.
■ Damaged insulation of the branch circuit.
■ No central system.
■ Each system is independent; the failure is limited to one fire zone.
■ Negligible fire hazard (SELV).
SMART – switching method and revision technology
A conventional installation requires that the operating mode of each circuit is specified at the design stage. Subsequent modifications or errors may cause extra costs. In order to eliminate such drawbacks, NORTHCLIFFE has introduced a new technology with automatic monitoring and individual control of each luminaire in a system.
Switching
Method
And
Revision
Technology
or SMART for short. This technology enables installation of luminaires- in a common circuit- operating in four modes: continuous, intermittent, switched and dimmed. Programming and monitoring of the luminaires are provided via power supply cables. The applied technology does not require the use of special communication cables. It can be implemented if appropriate address modules are installed in the luminaires. The modules are fitted as standard in all luminaires designed to work within CEBLV central battery system. Each address module is assigned with a unique address which enables its accurate identification in the system.
SMART advantages:
■ Luminaires operating in different modes can be installed within a single circuit.
■ Less cable is required.
■ Smaller number of circuits.
■ Lower installation costs.
■ Operating modes of the luminaires can be changed at any time.
SMART touch controller
The SMART touch controller enables remote control and monitoring of any number of units from a single location. The controller provides remote monitoring, configuration and reading of events for each connected CEBLV unit.
Features:
■ Functional test/Battery test activation for each device.
■ Global system locking/unlocking.
■ Password-protected access to the controller.
■ Checking the status of individual systems.
■ Full remote configuration of all systems.
■ Active list of systems enabling quick status checks.
■ Four globally configured inputs and outputs.
■ Standard fitted Ethernet interface to enable remote control and visualization of the system via a web browser.
The CEBLV system is equipped with an Ethernet port as standard. The connection enables remote checking of the status and setting up of the system via FIRE ZONE a dedicated website. This solution provides the user with the ability to control and monitor the system from a computer with a web browser installed. Tocheck the system status using a computer, the user only needs to log in to the structural network of the facility or building where the CEBLV is installed. Each unit, circuit and luminaire can be monitored via the Internet. The access to the dedicated website is password protected.
Bellow you can download leaflet about CEBLV – central battery low voltage system:
CEBLV - CENTRAL BATTERY LOW VOLTAGE SYSTEM.PDF