- New
Nord LED1x4250 G477 T830 OP LT80 IC ta-40+50C
non-dimmable, I, IP66, IK10, ta -40...+50 C, opal polycarbonate diffuser, light grey polycarbonate body, stainless steel clips
1572x96x111mm ▪ LED ▪ 3987lm ▪ 24,1W ▪ CRI80+ ▪ 3000K ▪ Surface, suspended
1572x96x111mm ▪ LED ▪ 3987lm ▪ 24,1W ▪ CRI80+ ▪ 3000K ▪ Surface, suspended
Description: |
Surface mounted waterproof LED luminaire for use in extreme temperature -40 to +50°C environments Light distribution type: direct Optical system: opal polycarbonate diffuser, UV stable, impact resistant Housing: polycarbonate Colour: light grey |
Instalation: | On the ceiling or wall (mounting brackets included), or suspended (hooks included). Push-in terminal, 5x2x2.5mm2 |
Environment | Indoor/outdoor with roof |
Application | industry, cold store, bakery, heating plant, glass factory |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 24.1 |
Technical data
Length, mm | 1572 |
Width, mm | 96 |
Height/depth, mm | 111 |
Net weight, kg | 2.6 |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 3987 |
System efficacy, lm/W | 165 |
CRI (Ra) | 80+ |
CCT, K | 3000 |
Distribution Type | Direct |
LED lifetime, h | 100000/L80B50 |
Standards
Operating temperature range, °C | ta -40...+50 |
Protection class IEC | I |
Ingress protection code | IP66 |
Mechanical impact resistance | IK10 |
Protection symbol | D |
Glow wire test, °C | 850 |
EEC | B |
Available options: |
T830 Colour temperature 3000K, CRI 80+ T840 Colour temperature 4000K, CRI 80+ OP LT80 Opal diffuser with high light transmittance DALI Driver with DALI interface and switch-control dimming *note - for DALI LIN option wires are 2x0.5mm2 COR Driver with Corridor function (never off) COR1min Driver with Corridor function 1min (switch off after 1 min.) COR30min Driver with Corridor function 30min (switch off after 30 min.) 1LIN Through wiring 3x1.5 mm² with two push-in terminal blocks 3LIN Through wiring 5x1.5 mm² with two push-in terminal blocks 1LIN2.5 Through wiring 3x2.5 mm² with two push-in terminal blocks 3LIN2.5 Through wiring 5x2.5 mm² with two push-in terminal blocks 2G Strain relief for power supply cable, 2pcs |
Note: | Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25°C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 24.1 |
Power factor | >0,95 |
Control gear | ECG on/off |
Integrated sensor | None |
Surge protection (L to N), kV | 4 |
Surge protection (L/N to PE), kV | 4 |
Inrush current (Imax/time) | 5A/ 1,000μs |
Overvoltage protection | 270V AC, 48h |
Connection | Push-in terminal, 5x2x2.5mm2 |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 3987 |
System efficacy, lm/W | 165 |
CRI (Ra) | 80+ |
CCT, K | 3000 |
SDCM | 3 |
Light Distribution | Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 ) |
Distribution Type | Direct |
Beam angle, ° | 125x103 |
LED lifetime, h | 100000/L80B50 |
Ripple current (≤120 Hz), % | ≤2 |
Technical data
Length, mm | 1572 |
Width, mm | 96 |
Height/depth, mm | 111 |
Total weight, kg | 2.86 |
Net weight, kg | 2.6 |
Quantity in package, pcs | 1 |
Packaging volume, m3/pcs | 0.0204 |
Pallet quantity, pcs | 84 |
Bar code | 01106240 |
Standards
Operating temperature range, °C | ta -40...+50 |
Protection class IEC | I |
Ingress protection code | IP66 |
Mechanical impact resistance | IK10 |
Protection symbol | D |
Glow wire test, °C | 850 |
EEC | B |
Certificates | CE, RoHS |
Warranty | 3 years (5 years – see warranty Ts and Cs) |