| Description: |
Surface mounted or suspended waterproof LED luminaire, basic version Light distribution type: direct Optical system: opal polycarbonate diffuser, UV stable, impact resistant Housing: polycarbonate Colour: light grey |
| Instalation: | On the ceiling or wall (mounting brackets included), or suspended (hooks included). Push-in terminal, 5x2x2.5mm2 |
| Environment | Indoor/outdoor with roof |
| Application | public place, industry, warehouse, hall, parking area, sports, transport terminal |
| Mains voltage | 220-240V, 50/60Hz |
| System power*, W | 59 |
| Length, mm | 1572 |
| Width, mm | 96 |
| Height/depth, mm | 111 |
| Net weight, kg | 2.6 |
| Light source and cap, W | LED |
| Light source included | yes |
| Luminaire output*, lm(ta+25°C) | 8278 |
| System efficacy, lm/W | 140 |
| CRI (Ra) | 80+ |
| CCT, K | 3000 |
| Distribution Type | Direct |
| LED lifetime, h | 50000/L80B10 |
| Operating temperature range, °C | ta -20...+35 |
| Protection class IEC | I |
| Ingress protection code | IP66 |
| Mechanical impact resistance | IK10 |
| Protection symbol | D |
| Glow wire test, °C | 850 |
| EEC | C |
| Available options: |
T830 Colour temperature 3000K, CRI 80+ T840 Colour temperature 4000K, CRI 80+ ABS/PMMA ABS/PMMA — body made from acrylonitrile butadiene styrene and diffuser from acrylic *note - Luminaires with ABS/PMMA options are equipped with plastic cable glands OP LT80 Opal diffuser with high light transmittance DALI Driver with DALI interface and switch-control dimming *note - for DALI LIN option wires are 2x0.5mm2 COR Driver with Corridor function (never off) COR1min Driver with Corridor function 1min (switch off after 1 min.) COR30min Driver with Corridor function 30min (switch off after 30 min.) MW Integrated microwave (MW) motion sensor with on-off control MWRFM+ Integrated microwave (MW) motion sensor with integrated RF (radio wave) transceiver. Sensor can serve as both master and slave. Functions: Staircase, Corridor, dimming control MWRFM+off Integrated microwave (MW) motion sensor with integrated RF (radio wave) transceiver. Sensor can serve as both master and slave. Functions: Staircase, Corridor, (no dimming control) MWRFM Integrated microwave (MW) motion sensor with integrated RF (radio wave) transmitter. Sensor can serve as master. Functions: Staircase, Corridor, dimming control MWRFS+ Integrated microwave (MW) motion sensor with integrated RF (radio wave) receiver. Sensor can serve as slave. Functions: Staircase, Corridor, dimming control MWRFS+off Integrated microwave (MW) motion sensor with integrated RF (radio wave) receiver. Sensor can serve as slave. Functions: Staircase, Corridor (no dimming control) MWRFS Integrated microwave (MW) motion sensor with integrated RF (radio wave) receiver. Sensor can serve as slave. Functions: Staircase, Corridor, (no dimming control) *note - all MWRFM and MWRFS options not applicable for models: H117, H118 HBPIR7m Integrated PIR and LUX level sensing sensor for high ceiling (up to 7 meters) with on-off control *note - the impact protection rating of the HBEAIR-M option is IK05, except when the SPORT option is used. *note - Luminaire with integrated HBPIR7m sensor protection degree is IP65 EMGB Emergency version 1 hour (best available technology) *note - option not applicable for model: H023 EM3B Emergency version 3 hours (best available technology) EM3A Emergency version equipped with an autonomous testing system, 3 hours EM3Atmin-25 Emergency version equipped with an autonomous testing system, 3 hours. Suitable for low ambient temperatures up to -25 C EM3D Emergency version 3 hours with DALI interface *note - options EM3A, EM3Atmin25 and EM3D not applicable for models: H117, H118 *note - Operating temperature range for Luminaires with EM option, C: ta 0... +35 5TB 5-pole terminal block in middle of luminaire for easy through wiring *note - 5TB terminal block included as standard 1LIN Through wiring 3x1.5 mm² with two push-in terminal blocks 3LIN Through wiring 5x1.5 mm² with two push-in terminal blocks 1LIN2.5 Through wiring 3x2.5 mm² with two push-in terminal blocks 3LIN2.5 Through wiring 5x2.5 mm² with two push-in terminal blocks *note - LIN options applicable for models longer than 800mm, for shorter models 5TB option 2G Strain relief for power supply cable, 2pcs II Electric shock protection class II IC Stainless steel clips |
| Note: | Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25°C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification |
| Mains voltage | 220-240V, 50/60Hz |
| System power*, W | 59 |
| Power factor | >0,95 |
| Control gear | ECG on/off |
| Integrated sensor | None |
| Surge protection (L to N), kV | 1 |
| Surge protection (L/N to PE), kV | 2 |
| Inrush current (Imax/time) | 33A/ 162μs |
| Connection | Push-in terminal, 5x2x2.5mm2 |
| Light source and cap, W | LED |
| Light source included | yes |
| Luminaire output*, lm(ta+25°C) | 8278 |
| System efficacy, lm/W | 140 |
| CRI (Ra) | 80+ |
| CCT, K | 3000 |
| SDCM | 3 |
| Light Distribution | Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 ) |
| Distribution Type | Direct |
| Beam angle, ° | 125x103 |
| LED lifetime, h | 50000/L80B10 |
| Ripple current (≤120 Hz), % | ≤1 |
| Length, mm | 1572 |
| Width, mm | 96 |
| Height/depth, mm | 111 |
| Total weight, kg | 2.86 |
| Net weight, kg | 2.6 |
| Quantity in package, pcs | 1 |
| Packaging volume, m3/pcs | 0.0204 |
| Pallet quantity, pcs | 84 |
| Bar code | 01108322 |
| Operating temperature range, °C | ta -20...+35 |
| Protection class IEC | I |
| Ingress protection code | IP66 |
| Mechanical impact resistance | IK10 |
| Protection symbol | D |
| Glow wire test, °C | 850 |
| EEC | C |
| Certificates | CE, RoHS |
| Warranty | 3 years |
| Light distribution curve (.jpg) |
|
| Technical drawing (.jpg) |
|
| Installation instruction (.pdf) |
|
| Family datasheet (.pdf) |
|
| СE declaration (.pdf) |
|
| Energy label (.pdf) |
|
| Product datasheet (.pdf) |
|
| Tender text (.txt) |
|
| Product: Barat LED1x8700 H124 T830 PC/PC OP LT80 • 1108322 Description: Surface mounted or suspended waterproof LED luminaire, basic version. Light distribution type: direct. Optical system: opal polycarbonate diffuser, UV stable, impact resistant. Housing: polycarbonate. Colour: light grey On the ceiling or wall (mounting brackets included), or suspended (hooks included). Push-in terminal, 5x2x2.5mm2 Environment: Indoor/outdoor with roof. Light source: LED. Light source included: yes. Distribution type: Direct. Beam angle, °: 125x103 . SDCM: 3. LED lifetime, h: 50000/L80B10. Ripple current (<120 Hz), %: ≤1. Mains voltage: 220-240V, 50/60Hz. Power factor: >0,95. Control gear: ECG on/off. Surge protection (L/N to PE): 1. Connection: Push-in terminal, 5x2x2.5mm2. Operating temperature, C°: ta -20...+35. Protection class IEC: I. Ingress protection code: IP66. Impact resistance: IK10. Protection symbol: D. Glow-wire test, C°: 850. EEC: C Dimension, mm: 1572x96x111 Luminaire output*, lm (ta=25°C): 8278 System power*, W: 59 System efficacy, lm/W: 140 CRI (Ra): 80+ CCT, K: 3000 Net weight, kg: 2.6 Manufacturer: NORTHCLIFFE LIGHTING, UAB • Raudondvario pl. 101, LT-47184 Kaunas, Lithuania • info@northcliffe.org • www.northcliffe.org |
|
| Product picture 1 (.jpg) |
|
| Product picture 2 (.jpg) |
|
| Product picture 3 (.jpg) |
|
| Product picture 4 (.jpg) |
|
| Application picture 5 (.jpg) |
|
| Application picture 6 (.jpg) |
|
| Application picture 7 (.jpg) |
|
| Application picture 8 (.jpg) |
|
| Application picture 9 (.jpg) |
|
| Application picture 10 (.jpg) |
|
