- New
Serpens LED1x1250 G631 T830 OP LO1 1LIN LL CORNER90 SB
non-dimmable, I, IP40, IK05, opal polycarbonate diffuser, white aluminium body, for corner connection
455x455x68mm ▪ LED ▪ 1151lm ▪ 10,1W ▪ CRI80+ ▪ 3000K ▪ Recessed
455x455x68mm ▪ LED ▪ 1151lm ▪ 10,1W ▪ CRI80+ ▪ 3000K ▪ Recessed
Description: |
Recessed mounted middle profile LED luminaire for in-line connection Light distribution type: direct Optical system: opal polycarbanate diffuser Housing: aluminium Colour: white (RAL9003S) |
Instalation: | In ceilings with cut-out openings (mounting brackets included), with L/LL option is designed for in-line connection. Through wired, 3x1.5mm2, push-in terminal 3x2x2.5mm2 and supply cord |
Environment | Indoor |
Application | office, education, corridor, retail, public place, hotel |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 10.1 |
Technical data
Length, mm | 455 |
Width, mm | 455 |
Height/depth, mm | 68 |
Net weight, kg | 1.9 |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 1151 |
System efficacy, lm/W | 114 |
CRI (Ra) | 80+ |
CCT, K | 3000 |
Distribution Type | Direct |
LED lifetime, h | 50000/L80B10 |
Standards
Operating temperature range, °C | ta -15...+35 |
Protection class IEC | I |
Ingress protection code | IP40 |
Mechanical impact resistance | IK05 |
Glow wire test, °C | 650 |
EEC | E |
Available options: |
T830 Colour temperature 3000K, CRI 80+ T840 Colour temperature 4000K, CRI 80+ OP Opal diffuser with high light transmittance DPRZ LT80 De-glaring micro-prismatic diffuser with matt light scattering layer LO1 Light output level 1 LO2 Light output level 2 LO3 Light output level 3 DALI Driver with DALI interface and switch-control dimming *note - for DALI LIN option wires are 2x0.5mm2 BLT Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth) TW Integrated light source and driver for Tuneable white control 2700-6500 K *note - ask for special models with option TW 5TB 5-pole terminal block in middle of luminaire for easy through wiring 1LIN Through wiring single phase d=1.5 mm² with two push-in terminal blocks 2LIN Through wiring two phases d=1.5 mm² with two push-in terminal blocks 3LIN Through wiring three phases d=1.5 mm² with two push-in terminal blocks 2G Strain relief for power supply cable, 2pcs LL for in-line connection intermediate luminaire *note - for L and LL models joint kit and 1LIN option included RAL9003S RAL 9003S colour RAL9005S RAL 9005S colour RAL RAL colour |
Note: | Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25 C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification. Photos are for illustrational purposes only. The exact appearance of the product may vary depending on the monitor settings, options selected and other factors. |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 10.1 |
Power factor | >0,92 |
Control gear | ECG on/off |
Integrated sensor | None |
Surge protection (L to N), kV | 1 |
Surge protection (L/N to PE), kV | 2 |
Inrush current (Imax/time) | 22A/ 136μs |
Overvoltage protection | 320V AC, 1h |
Driver lifetime, h | 100000/ B10 |
Connection | Through wired, 3x1.5mm2, push-in terminal 3x2x2.5mm2 and supply cord |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 1151 |
System efficacy, lm/W | 114 |
CRI (Ra) | 80+ |
CCT, K | 3000 |
SDCM | 3 |
Light Distribution | Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 ) |
Distribution Type | Direct |
Beam angle, ° | 109x109 |
LED lifetime, h | 50000/L80B10 |
Ripple current (≤120 Hz), % | ≤1 |
Technical data
Length, mm | 455 |
Width, mm | 455 |
Height/depth, mm | 68 |
Total weight, kg | 2.09 |
Net weight, kg | 1.9 |
Quantity in package, pcs | 1 |
Packaging volume, m3/pcs | 0.0148 |
Pallet quantity, pcs | 40 |
Bar code | 01111069 |
Standards
Operating temperature range, °C | ta -15...+35 |
Protection class IEC | I |
Ingress protection code | IP40 |
Mechanical impact resistance | IK05 |
Glow wire test, °C | 650 |
EEC | E |
Certificates | CE, UKCA, RoHS |
Warranty | 3 years (5 years – see warranty Ts and Cs) |