- New
Serpens LED1x1450 G189 T840 DPRZ LT80 LO1 SB
non-dimmable, I, IP40, IK05, UGR≤19, matt micro-prismatic polycarbonate diffuser, white aluminium body
1152x77x68mm ▪ LED ▪ 1403lm ▪ 12.7W ▪ CRI80+ ▪ 4000K ▪ Recessed
1152x77x68mm ▪ LED ▪ 1403lm ▪ 12.7W ▪ CRI80+ ▪ 4000K ▪ Recessed
Description: |
A recessed medium profile LED luminaire for in-line connection Light distribution type: direct Optical system: matt micro-prismatic polycarbanate diffuser, low glare Housing: aluminium Colour: white (RAL9003S) |
Instalation: | In ceilings with cut-out openings (mounting brackets included), with L/LL option is designed for in-line connection. Push-in terminal, 3x2x2.5mm2 |
Environment | Indoor |
Application | office, education, corridor, retail, public place, hotel |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 12.7 |
Technical data
Length, mm | 1152 |
Width, mm | 77 |
Height/depth, mm | 68 |
Mounting holes/cut-out dimensions, mm | 1142x68 |
Net weight, kg | 2.5 |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 1403 |
System efficacy, lm/W | 110 |
CRI (Ra) | 80+ |
CCT, K | 4000 |
Distribution Type | Direct |
LED lifetime, h | 50000/L80B10 |
Standards
Operating temperature range, °C | ta -15...+35 |
Protection class IEC | I |
Ingress protection code | IP40 |
Mechanical impact resistance | IK05 |
Glow wire test, °C | 650 |
EEC | E |
Available options: |
T830 Colour temperature 3000K, CRI 80+ T840 Colour temperature 4000K, CRI 80+ OP Opal diffuser with high light transmittance DPRZ LT80 De-glaring micro-prismatic diffuser with matt light scattering layer LO1 Light output level 1 LO2 Light output level 2 LO3 Light output level 3 LO4 Light output level 4 DALI Driver with DALI interface and switch-control dimming *note - for DALI LIN option wires are 2x0.5mm2 EAIRB Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control *note - ingress protection IP20 *note - EAIRB option is not applicable for lengths under 800mm *note - for models G189...G191 and J664 EAIRB option cannot be combined with EM options *note - For option EAIRB luminaire housing is 65mm longer *note - EAIRB sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm BLT Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth) MW Integrated microwave (MW) motion sensor with on-off control *note - for option MW luminaire housing is 72mm longer *note - MW sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm PIR Integrated PIR sensor with on-off control *note - PIR option is not applicable for length under 800mm *note - ingress protection IP40 *note - for option PIR luminaire housing is 50mm longer *note - PIR sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm TW Integrated light source and driver for Tuneable white control 2700-6500 K *note - Please ask for special models with options EAIRB and TW. EM3 Emergency version 3 hours EM3B Emergency version 3 hours (best available technology) EM3A Emergency version equipped with an autonomous testing system, 3 hours EM3D Emergency version 3 hours with DALI interface *note - EM options applicable for models longer than 1000mm *note - Operating temperature range for Luminaires with EM option, C: ta 0... +35 5TB 5-pole terminal block in middle of luminaire for easy through wiring 1LIN Through wiring single phase d=1.5 mm² with two push-in terminal blocks 2LIN Through wiring two phases d=1.5 mm² with two push-in terminal blocks 3LIN Through wiring three phases d=1.5 mm² with two push-in terminal blocks *note - LIN options applicable for models longer than 800mm, for shorter models 5TB option 2G Strain relief for power supply cable, 2pcs L for in-line connection end/first luminaire (lengths: 578/ 858/ 1138/ 1418/ 1698/ 1978/ 2118/ 2258/ 2538/ 2958mm) LL for in-line connection intermediate luminaire (lengths: 563/ 843/ 1123/ 1403/ 1683/ 1963/ 2103/ 2243/ 2523/ 2943mm) *note - for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800mm) SB Support brackets for installation into a plasterboard ceiling *note - SB option included IP44 IP44 protection degree (not applicable for L and LL type luminaires) *note - IP44 option not applicable for L and LL models RAL RAL colour |
Note: | Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25 C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification. Photos are for illustrational purposes only. The exact appearance of the product may vary depending on the monitor settings, options selected and other factors. |
Electrical data
Mains voltage | 220-240V, 0/50/60Hz |
System power*, W | 12.7 |
Power factor | >0,92 |
Control gear | ECG on/off |
Integrated sensor | None |
Surge protection (L to N), kV | 1 |
Surge protection (L/N to PE), kV | 2 |
Inrush current (Imax/time) | 22A/ 136μs |
Overvoltage protection | 320V AC, 1h |
Connection | Push-in terminal, 3x2x2.5mm2 |
Lighting data
Light source and cap, W | LED |
Light source included | yes |
Luminaire output*, lm(ta+25°C) | 1403 |
System efficacy, lm/W | 110 |
CRI (Ra) | 80+ |
CCT, K | 4000 |
SDCM | 3 |
Light Distribution | Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 ) |
Distribution Type | Direct |
Beam angle, ° | 87x90 |
UGR index | ≤19 |
LED lifetime, h | 50000/L80B10 |
Ripple current (≤120 Hz), % | ≤1 |
Technical data
Length, mm | 1152 |
Width, mm | 77 |
Height/depth, mm | 68 |
Total weight, kg | 2.75 |
Net weight, kg | 2.5 |
Mounting holes/cut-out dimensions, mm | 1142x68 |
Quantity in package, pcs | 1 |
Packaging volume, m3/pcs | 0.0083 |
Pallet quantity, pcs | 110 |
Bar code | 01106797 |
Standards
Operating temperature range, °C | ta -15...+35 |
Protection class IEC | I |
Ingress protection code | IP40 |
Mechanical impact resistance | IK05 |
Glow wire test, °C | 650 |
EEC | E |
Certificates | CE, UKCA, RoHS |
Warranty | 3 years (5 years – see warranty Ts and Cs) |