• New

Barat LED1x6750 G250 T840 PC/PC OP LT80

non-dimmable, I, IP66, IK10, opal polycarbonate diffuser, light grey polycarbonate body
1572x96x111mm ▪ LED ▪ 6747lm ▪ 40,8W ▪ CRI80+ ▪ 4000K ▪ Surface, suspended

Order code: 1105246

Category: Waterproof and cleanroom luminaires

Description: Surface mounted or suspended waterproof LED luminaire
Light distribution type: direct
Optical system: opal polycarbonate diffuser, UV stable, impact resistant
Housing: polycarbonate
Colour: light grey
Instalation: On the ceiling or wall (mounting brackets included), or suspended (hooks included). Push-in terminal, 5x2x2.5mm2
Environment Indoor/outdoor with roof
Application public place, industry, warehouse, hall, parking area, sports, transport terminal

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 40.8

Technical data

Length, mm 1572
Width, mm 96
Height/depth, mm 111
Net weight, kg 2.6

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm(ta+25°C) 6747
System efficacy, lm/W 165
CRI (Ra) 80+
CCT, K 4000
Distribution Type Direct
LED lifetime, h 100000/L80B10

Standards

Operating temperature range, °C ta -20...+35
Protection class IEC I
Ingress protection code IP66
Mechanical impact resistance IK10
Protection symbol D
Glow wire test, °C 850
EEC B

Technical drawing (.jpg)

Light distribution curve (.jpg)

Energy label (.pdf)

Available options: T830 Colour temperature 3000K, CRI 80+
T840 Colour temperature 4000K, CRI 80+
ABS/PMMA ABS/PMMA — body made from acrylonitrile butadiene styrene and diffuser from acrylic
*note - Luminaires with ABS/PMMA options are equipped with plastic cable glands
OP LT80 Opal diffuser with high light transmittance
DALI Driver with DALI interface and switch-control dimming
*note - for DALI LIN option wires are 2x0.5mm2
COR Driver with Corridor function (never off)
COR1min Driver with Corridor function 1min (switch off after 1 min.)
COR30min Driver with Corridor function 30min (switch off after 30 min.)
MW Integrated microwave (MW) motion sensor with on-off control
MWRFMD Built-in microwave motion sensor with integrated wireless transceiver. Sensor can serve as both master and slave. Functions: staircase, corridor, dimming control.
MWRFM Built-in microwave motion sensor with integrated wireless transceiver. Sensor can serve as both master and slave. Functions: Staircase, Corridor.
MWRFSD Built-in wireless receiver for receiving master luminaire control signals. Functions: staircase, corridor, dimming control.
MWRFS Built-in wireless receiver for receiving master luminaire control signals. Functions: staircase, corridor.
*note - all MWRFM and MWRFS options not applicable for models: G237, G238, G239
HBPIR7m Integrated PIR and LUX level sensing sensor for high ceiling (up to 7 meters) with on-off control
*note - Luminaire with integrated HBPIR7m sensor protection degrees are IP65 and IK05
HBPIR15m-M Master luminaire with Integrated PIR and LUX level sensing sensor for high ceiling (up to 15 meters) with on-off control, possibility to connect and control other (slave) luminaires (parameters according to datasheet)
*note - max switching load up to 2A
*note - the impact protection rating of the HBPIR15m-M option is IK05, except when the SPORT option is used.
DALI HBPIRD15m-M DALI master luminaire with Integrated driver and sensor for high ceilings (up to 15 meters), with possibility to control DALI (slave) luminaires (parameters according to datasheet)
*note - max. 15 DALI slaves
*note - the impact protection rating of the DALI HBPIRD15m-M option is IK05, except when the SPORT option is used.
KRBLT HBPIR15m-M Master luminaire with smart batten-fit PIR sensor for high ceilings (up to 15 meters), Bluetooth controllable, with wireless communication and grouping possibility of slave luminaires.
*note - the impact protection rating of the KRBLT HBPIR15m-M option is IK05, except when the SPORT option is used.
DALI KRBLT HBPIRD15m-M Master luminaire with smart batten-fit PIR DALI sensor for high ceilings (up to 15 meters), Bluetooth controllable, with wireless communication and grouping possibility of slave luminaires.
*note - max. 15 DALI slaves
*note - the impact protection rating of the DALI KRBLT HBPIRD15m-M option is IK05, except when the SPORT option is used.
EMGB Emergency version 1 hour (best available technology)
*note - option not applicable for model: H023
EM3B Emergency version 3 hours (best available technology)
EM3A Emergency version equipped with an autonomous testing system, 3 hours
EM3Atmin-25 Emergency version equipped with an autonomous testing system, 3 hours. Suitable for low ambient temperatures up to -25 C
EM3D Emergency version 3 hours with DALI interface
*note - Operating temperature range for Luminaires with EM option, C: ta 0... +35
1LIN Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN Through wiring three phases d=1.5 mm² with two push-in terminal blocks
1LIN2.5 Through wiring single phase d=2.5 mm² with two push-in terminal blocks
2LIN2.5 Through wiring two phases d=2.5 mm² with two push-in terminal blocks
3LIN2.5 Through wiring three phases d=2.5 mm² with two push-in terminal blocks
*note - LIN options applicable for models longer than 800mm, for shorter models 5TB option
2G Strain relief for power supply cable, 2pcs
II Electric shock protection class II
IC Stainless steel clips
Note: Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25 C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification. Photos are for illustrational purposes only. The exact appearance of the product may vary depending on the monitor settings, options selected and other factors.

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 40.8
Power factor >0,95
Control gear ECG on/off
Integrated sensor None
Surge protection (L to N), kV 1
Surge protection (L/N to PE), kV 2
Inrush current (Imax/time) 33A/ 162μs
Overvoltage protection 320V AC, 1h
Connection Push-in terminal, 5x2x2.5mm2

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm(ta+25°C) 6747
System efficacy, lm/W 165
CRI (Ra) 80+
CCT, K 4000
SDCM 3
Light Distribution Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 )
Distribution Type Direct
Beam angle, ° 125x103
LED lifetime, h 100000/L80B10
Ripple current (≤120 Hz), % ≤1

Technical data

Length, mm 1572
Width, mm 96
Height/depth, mm 111
Total weight, kg 2.86
Net weight, kg 2.6
Quantity in package, pcs 1
Packaging volume, m3/pcs 0.0204
Pallet quantity, pcs 84
Bar code 01105246

Standards

Operating temperature range, °C ta -20...+35
Protection class IEC I
Ingress protection code IP66
Mechanical impact resistance IK10
Protection symbol D
Glow wire test, °C 850
EEC B
Certificates CE, UKCA, RoHS
Warranty 3 years (5 years – see warranty Ts and Cs)

Photometric data

Light distribution curve (.jpg)
Photometric (.ldt)

Technical data

Technical drawing (.jpg)
Installation instruction (.pdf)

Product data

Family datasheet (.pdf)
СE declaration (.pdf)
Energy label (.pdf)
Product datasheet (.pdf)
Tender text (.txt)
Product: Barat LED1x6750 G250 T840 PC/PC OP LT80 • 1105246
Description: Surface mounted or suspended waterproof LED luminaire. Light distribution type: direct. Optical system: opal polycarbonate diffuser, UV stable, impact resistant. Housing: polycarbonate. Colour: light grey On the ceiling or wall (mounting brackets included), or suspended (hooks included). Push-in terminal, 5x2x2.5mm2 Environment: Indoor/outdoor with roof. Light source: LED. Light source included: yes. Distribution type: Direct. Beam angle, °: 125x103 . SDCM: 3. LED lifetime, h: 100000/L80B10. Ripple current (<120 Hz), %: ≤1. Mains voltage: 220-240V, 0/50/60Hz. Power factor: >0,95. Control gear: ECG on/off. Surge protection (L/N to PE): 1. Overvoltage protection: 320V AC, 1h. Connection: Push-in terminal, 5x2x2.5mm2. Operating temperature, C°: ta -20...+35. Protection class IEC: I. Ingress protection code: IP66. Impact resistance: IK10. Protection symbol: D. Glow-wire test, C°: 850. EEC: B

Dimension, mm: 1572x96x111
Luminaire output*, lm (ta=25°C): 6747
System power*, W: 40.8
System efficacy, lm/W: 165
CRI (Ra): 80+
CCT, K: 4000
Net weight, kg: 2.6

Manufacturer: NORTHCLIFFE LIGHTING, UAB • Raudondvario pl. 101, LT-47184 Kaunas, Lithuania • info@northcliffe.org • www.northcliffe.org

Product pictures

Product picture 1 (.jpg)
Product picture 2 (.jpg)
Product picture 3 (.jpg)
Product picture 4 (.jpg)
Application picture 5 (.jpg)
Application picture 6 (.jpg)
Application picture 7 (.jpg)
Application picture 8 (.jpg)
Application picture 9 (.jpg)
Application picture 10 (.jpg)