• New

Decor LED1x2300 D610 T830 OP LT80 LO1

non-dimmable, I, IP40, IK05, opal polycarbonate diffuser, light grey aluminium body
1418x58x68mm ▪ LED ▪ 2174lm ▪ 19.3W ▪ CRI80+ ▪ 3000K ▪ Surface luminaires

Order code: 1100332

Category: Aluminium profile luminaires

Description: A surface or suspended LED luminaire with opal or micro-linear prismatic difuser for in-line connection without gaps
Diffuser: opal (OP LT80) or micro-linear prismatic (PRZ) polycarbonate, UV stabilized
Body: extruded aluminium profile, light grey (RAL 9006) finish with sandpaper texture
Instalation: Surface luminaire designed to be fixed to ceiling of any type or suspended. Wire suspension set and plastic cap are available on request. Luminaire with an option L or LL is designed for in-line connection. Push-in terminal, 5x2x2.5mm2
Environment Indoor
Application office, education, corridor, retail, public place, household, hotel

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 19.3

Technical data

Length, mm 1418
Width, mm 58
Height/depth, mm 68
Net weight, kg 2.6

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm (ta+25°C) 2174
System efficacy, lm/W 113
CRI (Ra) 80+
CCT, K 3000
Distribution Type Direct
LED lifetime, h 50000/L90B50

Standards

Operating temperature range, °C ta -15...+35
Protection class IEC I
Ingress protection code IP40
Mechanical impact resistance IK05
Glow wire test, °C 650
EEC A++

Technical drawing (.jpg)

Light distribution curve (.jpg)

Energy label (.pdf)

Available options: SDIM Driver with switch-control dimming
DALI Driver with DALI interface
5TB 5-pole terminal block in middle of luminaire for easy through wiring
1LIN Through wiring 3x1.5 mm² with two push-in terminal blocks
3LIN Through wiring 5x1.5 mm² with two push-in terminal blocks
*note - LIN options applicable for models longer than 800mm, for shorter models 5TB option
L for in-line connection end/first luminaire (lengths: 592/ 885/ 1177/ 1411/ 1645/ 1762/ 1938/ 2113/ 2464/ 2640/ 2815mm)
LL for in-line connection intermediate luminaire (lengths: 585/ 878/ 1170/ 1404/ 1638/ 1755/ 1931/ 2106/ 2457/ 2633/ 2808mm)
*note - for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800mm)
I-join L Luminaire designed to in-line connection with join element - end/first luminaire (joint element not included)
I-join LL Luminaire designed to in-line connection with join element - intermediate luminaire (joint element not included)
*note - for I-join L and I-join LL models joint kit not included, 1LIN option included (5TB option for lengths up to 800mm)
1G Strain relief for power supply cable
*note - 1G option included for models marked with ENEC
OP LT80 Opal diffuser with high light transmittance
PRZ Micro-linear prismatic diffuser
LO1 Light output level 1
LO2 Light output level 2
LO3 Light output level 3
SUS Suspended version
RAL9003S RAL 9003S colour
RAL9005S RAL 9005S colour
RAL RAL colour
T830 Colour temperature 3000K, CRI 80+
T840 Colour temperature 4000K, CRI 80+

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 19.3
Power factor >0,95
Control gear ECG on/off
Connection Push-in terminal, 5x2x2.5mm2

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm (ta+25°C) 2174
System efficacy, lm/W 113
CRI (Ra) 80+
CCT, K 3000
Distribution Type Direct
Beam angle, °C 101x104°
LED lifetime, h 50000/L90B50

Technical data

Length, mm 1418
Width, mm 58
Height/depth, mm 68
Total weight, kg 2.86
Net weight, kg 2.6
Quantity in package, pcs 1
Packaging volume, m3/pcs 0.007627152
Pallet quantity, pcs 150
Bar code 01100332

Standards

Operating temperature range, °C ta -15...+35
Protection class IEC I
Ingress protection code IP40
Mechanical impact resistance IK05
Glow wire test, °C 650
EEC A++
Certificates CE, RoHS, ENEC
Warranty 3 years

Photometric data

Light distribution curve (.jpg)

Technical data

Technical drawing (.jpg)