• New

Serpens LED1x3950 J664 T830 DPRZ LT80 LO4 SB

non-dimmable, I, IP40, IK05, low glare, matt micro-prismatic polycarbonate diffuser, white aluminium body
1152x77x68mm ▪ LED ▪ 3767lm ▪ 38.6W ▪ CRI80+ ▪ 3000K ▪ Recessed

Order code: 1116595

Category: Aluminium profile luminaires

Description: A recessed medium profile LED luminaire for in-line connection
Light distribution type: direct
Optical system: matt micro-prismatic polycarbanate diffuser, low glare
Housing: aluminium
Colour: white (RAL9003S)
Instalation: In ceilings with cut-out openings (mounting brackets included), with L/LL option is designed for in-line connection. Push-in terminal, 3x2x2.5mm2
Environment Indoor
Application office, education, corridor, retail, public place, hotel

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 38.6

Technical data

Length, mm 1152
Width, mm 77
Height/depth, mm 68
Mounting holes/cut-out dimensions, mm 1142x68
Net weight, kg 2.5

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm(ta+25°C) 3767
System efficacy, lm/W 98
CRI (Ra) 80+
CCT, K 3000
Distribution Type Direct
LED lifetime, h 50000/L80B10

Standards

Operating temperature range, °C ta -15...+35
Protection class IEC I
Ingress protection code IP40
Mechanical impact resistance IK05
Glow wire test, °C 650
EEC E

Technical drawing (.jpg)

Light distribution curve (.jpg)

Available options: T830 Colour temperature 3000K, CRI 80+
T840 Colour temperature 4000K, CRI 80+
OP Opal diffuser with high light transmittance
DPRZ LT80 De-glaring micro-prismatic diffuser with matt light scattering layer
LO1 Light output level 1
LO2 Light output level 2
LO3 Light output level 3
LO4 Light output level 4
DALI Driver with DALI interface and switch-control dimming
*note - for DALI LIN option wires are 2x0.5mm2
EAIRB Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
*note - ingress protection IP20
*note - EAIRB option is not applicable for lengths under 800mm
*note - for models G189...G191 and J664 EAIRB option cannot be combined with EM options
*note - For option EAIRB luminaire housing is 65mm longer
*note - EAIRB sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm
BLT Integrated wireless control unit and driver for lighting control via mobile device (via Bluetooth)
MW Integrated microwave (MW) motion sensor with on-off control
*note - for option MW luminaire housing is 72mm longer
*note - MW sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm
PIR Integrated PIR sensor with on-off control
*note - PIR option is not applicable for length under 800mm
*note - ingress protection IP40
*note - for option PIR luminaire housing is 50mm longer
*note - PIR sensor is positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm
TW Integrated light source and driver for Tuneable white control 2700-6500 K
*note - Please ask for special models with options EAIRB and TW.
EM3 Emergency version 3 hours
EM3B Emergency version 3 hours (best available technology)
EM3A Emergency version equipped with an autonomous testing system, 3 hours
EM3D Emergency version 3 hours with DALI interface
*note - EM options applicable for models longer than 1000mm
*note - Operating temperature range for Luminaires with EM option, C: ta 0... +35
5TB 5-pole terminal block in middle of luminaire for easy through wiring
1LIN Through wiring single phase d=1.5 mm² with two push-in terminal blocks
2LIN Through wiring two phases d=1.5 mm² with two push-in terminal blocks
3LIN Through wiring three phases d=1.5 mm² with two push-in terminal blocks
*note - LIN options applicable for models longer than 800mm, for shorter models 5TB option
2G Strain relief for power supply cable, 2pcs
L for in-line connection end/first luminaire (lengths: 578/ 858/ 1138/ 1418/ 1698/ 1978/ 2118/ 2258/ 2538/ 2958mm)
LL for in-line connection intermediate luminaire (lengths: 563/ 843/ 1123/ 1403/ 1683/ 1963/ 2103/ 2243/ 2523/ 2943mm)
*note - for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800mm)
SB Support brackets for installation into a plasterboard ceiling
*note - SB option included
IP44 IP44 protection degree (not applicable for L and LL type luminaires)
*note - IP44 option not applicable for L and LL models
RAL RAL colour
Note: Tolerance range for optical and electrical data: ±10%. Values apply to an ambient temperature of 25 C. NORTHCLIFFE LIGHTING is constantly developing and improving its products. The right is reserved to change any product specifications without prior notification. Photos are for illustrational purposes only. The exact appearance of the product may vary depending on the monitor settings, options selected and other factors.

Electrical data

Mains voltage 220-240V, 0/50/60Hz
System power*, W 38.6
Power factor 0.95
Control gear ECG on/off
Integrated sensor None
Surge protection (L to N), kV 1
Surge protection (L/N to PE), kV 2
Inrush current (Imax/time) 51A/ 194μs
Overvoltage protection 320V AC, 1h
Connection Push-in terminal, 3x2x2.5mm2

Lighting data

Light source and cap, W LED
Light source included yes
Luminaire output*, lm(ta+25°C) 3767
System efficacy, lm/W 98
CRI (Ra) 80+
CCT, K 3000
SDCM 3
Light Distribution Wide-wide beam (C0-C180 plane 76 …125 , C90-C270 plane 76 …125 )
Distribution Type Direct
Beam angle, ° 87x90
LED lifetime, h 50000/L80B10
Ripple current (≤120 Hz), % ≤1

Technical data

Length, mm 1152
Width, mm 77
Height/depth, mm 68
Total weight, kg 2.75
Net weight, kg 2.5
Mounting holes/cut-out dimensions, mm 1142x68
Quantity in package, pcs 1
Packaging volume, m3/pcs 0.0083
Pallet quantity, pcs 110
Bar code 01116595

Standards

Operating temperature range, °C ta -15...+35
Protection class IEC I
Ingress protection code IP40
Mechanical impact resistance IK05
Glow wire test, °C 650
EEC E
Certificates CE, UKCA, RoHS
Warranty 3 years (5 years – see warranty Ts and Cs)

Photometric data

Light distribution curve (.jpg)
Photometric (.ldt)

Technical data

Technical drawing (.jpg)
Installation instruction (.pdf)

Product data

Family datasheet (.pdf)
СE declaration (.pdf)
Product datasheet (.pdf)
Tender text (.txt)
Product: Serpens LED1x3950 J664 T830 DPRZ LT80 LO4 SB • 1116595
Description: A recessed medium profile LED luminaire for in-line connection. Light distribution type: direct. Optical system: matt micro-prismatic polycarbanate diffuser, low glare. Housing: aluminium . Colour: white (RAL9003S) In ceilings with cut-out openings (mounting brackets included), with L/LL option is designed for in-line connection. Push-in terminal, 3x2x2.5mm2 Environment: Indoor. Light source: LED. Light source included: yes. Distribution type: Direct. Beam angle, °: 87x90. SDCM: 3. LED lifetime, h: 50000/L80B10. Ripple current (<120 Hz), %: ≤1. Mains voltage: 220-240V, 0/50/60Hz. Power factor: 0.95. Control gear: ECG on/off. Surge protection (L/N to PE): 1. Overvoltage protection: 320V AC, 1h. Connection: Push-in terminal, 3x2x2.5mm2. Operating temperature, C°: ta -15...+35. Protection class IEC: I. Ingress protection code: IP40. Impact resistance: IK05. Glow-wire test, C°: 650. EEC: E

Dimension, mm: 1152x77x68
Luminaire output*, lm (ta=25°C): 3767
System power*, W: 38.6
System efficacy, lm/W: 98
CRI (Ra): 80+
CCT, K: 3000
Net weight, kg: 2.5

Manufacturer: NORTHCLIFFE LIGHTING, UAB • Raudondvario pl. 101, LT-47184 Kaunas, Lithuania • info@northcliffe.org • www.northcliffe.org

Product pictures

Product picture 1 (.jpg)
Application picture 2 (.jpg)
Application picture 3 (.jpg)
Application picture 4 (.jpg)
Application picture 5 (.jpg)
Application picture 6 (.jpg)