iDIM applications

Simple solutions
The luminaire based iDim concept provides 6 out-of-box application modes that are easy to select just by rotating the Mode Selector on the iDim Sense. The modes are designed to fulfil the needs for easy-to-use, energy saving lighting control. The basic functions are pre-programmed and are fully adjustable to meet all requirements.

 

 

 

Easy intelligence in luminaires
The iDim intelligence is literally the sum of its parts. Intelligent components iDim Sense, iDim Solo and EL-iDim ballast with the iDim Remote can turn every luminaire into a smart solution providing optimal lighting and energy efficiency. Designed for the future, all components meet the demanding legislations.

 

 Click-and-go!
Simple clip-on connectors make the assembly into the luminaire quick and easy; just click-and-go!
1. Click the iDim Sense into the luminaire
2. Click the iDim Sense cable into the iDim Solo unit
3. Turn the iDim Sense mode selector and choose the right application mode

 

 

 

Movement Detector (PIR) Coverage

Photocell Coverage (CL)

 

Occupancy Timeout: Time when PIR detects no movement and maintains level before moving to transition timeout
Transition Timeout: Lights are lowered to energy saving level for a specific time before switching off.
Bright Out – Go Off: If lights are on and there is enough daylight then the lights will go to min level (or off).
Bright Out – Stay Off: If lights are off and there is enough daylight then the lights will stay at min level (or off).
DALI 1 / DALI 2: The outputs can operate as either  Constant Light (CL), Fixed Light (FL) and Offset light.
Presence and absence: Functions can either be enabled or disabled.

 

Occupancy and Transition Timeout (PIR)

 

Constant Light (CL) & Offset

 

Constant Light (CL) & Fixed Light (FL)



TIMING&

LEVEL



OCCUPANCY

TIMEOUT

15 min

15 min

15 min

5min

15 min

15 min

TRANSITION

TIMEOUT

(LEVEL)

1 min

(20%)

1 min

(20%)

60 min

(20%)

30 min

(20%)

1 min

(20%)

1 min

(20%)

BRIGHT

OUT



GO OFF

STAY OFF

CHANNELS



DALI 1

CL

CL

CL

FL

CL

CL

DALI 2

Offset

Offset

Offset

FL

Link to

Corridor

FL

PRESENCE

ENABLED/

DISABLED

Disabled

Manual On

Enabled

Auto On

Enabled

Auto On

Enabled

Auto On

Enabled

Auto On

Disabled

Manual On

ABSENCE

ENABLED/

DISABLED

Enabled

Auto Off

Enabled

Auto Off

Enabled

Auto Off

Enabled

Auto Off

Enabled

Auto Off

Enabled

Auto Off

 

 

Classroom

Optimal lighting and maximum energy saving are automatically achieved thanks to the intelligent technology. iDim adjusts the lights depending on presence detection and ambient light. Out-of-box features can be easily customised to meet different needs.

 

 

 

Single office

The simple out-of-box functionality responds to area occupation and ambient light always producing the

right light. Automatic features enable energy saving and user comfort. Advanced features as individual control and custom settings are possible with iDim Remote, PC-interface and DIGIDIM modular panels.

Open plan Office

 

This mode keeps the lights on only when and where needed. It is an energy and cost efficient application creating a safe and convenient working environment for everyone at the same time. All advanced features are available for custom fine tuning.

 

 

Corridor link

Wherever occupancy is detected, the whole corridor lights up at once. Multiple sections / sensors can be interlinked together creating a powerful solution that can light up a corridor of every length.

 

Corridor hold

This unique application links the single offi ces with the corridor link mode. Whenever the offi ces are occupied, the corridor is held lit. The corridor hold is a fully automatic function that promotes energy savings as well as safety.

SHAPE \* MERGEFORMAT

 

Meeting room

This mode takes care that the lights are switched on only when needed. You can switch the lights both on and off manually or let the system take care of the switching off. The constant light feature adjusts the right lighting and scenecontrol is possible with iDim Remote and DIGIDIM modular panels.

 

The Remote 304 is a handheld unit that can be used to control basic system functions as on/off, increasing and decreasing the general light level and the section of four scenes. Could be used for simple systems programming.

 

Sense is a luminaire based DALI sensor. It combines a movement detector (PIR), remote control receiver (IR) and photosell (CL) in one enclosure. Manual mode selector allows user to easily select one of the 6 out-of-box application modes.

 
 
 
 
 
 

Solo is used as an interface module to connect Sense and Dali ballasts as well as user interfaces. Additionally it acts as DALI power supply (PSU).

 

Ask a question or make an inquiry about the production

The fields marked by * must be completed.


Text of the question or inquiry *
 
Your name (optional)
E-mail *
Phone number (optional)
   
Translate this page with Google: